Start a project

3D design

No file needed. Send a sketch, photos with measurements, or the part that broke, and we'll model it.

Start a design project
  1. ViewsTop view first, with centre lines.
  2. ProjectionsFront and side, hidden edges dashed.
  3. DimensionsEvery size that matters.
  4. SectionA cut to check the walls.
  5. NotesMaterial, tolerance, print orientation.
AASECTION A-A1207244Ø52Ø35 × 11 DEEP4 × SLOT Ø9 × 14, CBORE Ø15 × 4R8 TYPØ20 THRUNOTES1. General tolerance ±0.5 mm unless noted.2. Bearing seat sized for a 6202 bearing. Check fit on the part.3. Ribs 6 mm typical. Minimum wall 4.0 mm. 4 × M4 × 10 on PCD 45.4. Print with the base flat on the build plate.AP3D BEARING HOUSINGDWG AP3D-1002MATERIAL PETGUNITS mmSHEET 1 OF 1

Designed for how it's printed

FDMMJF
Minimum wall1.2 mm1.0 mm
Gap for moving parts0.3 to 0.5 mm0.3 to 0.4 mm
OverhangsUp to about 45° without supportsAny angle
ThreadsBrass insertsPrinted, M6 and up

You get the STEP and STL files with the finished part.

Have a part in mind? Send what you have and we'll reply with a price.

Start a project